This page includes six solutions to help you get rid of Windows 10 stuck at scanning và repairing drive error. Refer to the manual tutorial and check out how to lớn remove scanning và repairing drive stuck on your own: 


Workable SolutionsStep-by-step Troubleshooting
Fix 1. Check Disk ConnectionRemove the computer case > check the cable and port to ensure the disk is correctly connected...

Bạn đang xem: Scanning and repairing drive c mean

Full steps
Fix 2. Let Scanning Process FinishIf the drive is in a bad condition, the scanning process may take longer và you need khổng lồ wait for it khổng lồ finish...Full steps
Fix 3. Stop Scanning ProcessShutdown PC by pressing the power button > Restart PC > Enter "Repairing Automatic Repair"...Full steps
More FixesPress the nguồn button to lớn shutdown PC > Restart PC và hold the power nguồn button for 10 seconds ...Full steps

Windows 10 Stuck at Scanning and Repairing Drive

"My Lenovo running Windows 10 is stuck on boot and shows a message "Scanning & repairing drive (C:): 11% complete". It has been hanging there for about half a day now! How can I exit out of scanning & repairing drive?"

*

Getting stuck at scanning và repairing drive is one of the biggest headaches for Windows 10 computer users. It happens when CHKDSK"s scanning và repairing hard drive seems to lớn never finish, halting at a certain percentage value và not advancing. Generally, you might see Windows 10 get stuck at scanning & repairing the drive C: or D:. The scan will often partially complete, but then get stuck on a particular percent.


*

Best Data Recovery Software for Deleted Data Recovery

Here is a danh sách of the best data recovery software for Windows & Mac users. Use data recovery software lớn retrieve deleted or lost data quickly.


*

About Scanning và Repairing Drive

Scanning and repairing drive is a disk checking process in Windows Automatic Repair (the same as Startup Repair). When there is a boot issue on the computer, Automatic Repair will start automatically và you will see the computer screen showing Preparing Automatic Repair, Diagnosing your PC, và then Scanning & repairing drive C, D... You may also initiate the Startup Repair by yourself from the Advanced Options in the Windows Recovery Environment (WinRE). If the "Scanning và repairing drive" process gets stuck, it suggests that there is trouble reading the drive, which might result from disk connection issues or disk errors lượt thích bad sectors và file system errors.

6 Fixes for Scanning & Repairing Drive C/D Stuck at 0%, 10%, 11%...100%

This guide offers six proven methods khổng lồ fix the scanning và repairing drive stuck issue & enable you to lớn boot the computer again.

Fix 1. Kiểm tra the Disk Connection

Have you moved around the PC recently or done something familiar that is likely khổng lồ displace the computer disks? If you have, the cause of the "Scanning & repairing drive" stuck might be the connection issues between the disk & the computer. If possible, recheck the cable và port to ensure the disks have been connected to the PC correctly.

Fix 2. Wait for the Scanning and Repairing Process khổng lồ Finish

How long should scanning and repairing drive take? That depends. If there is a minor issue on the drive, that process won"t take long. However, if the drive is in a bad condition, it may take hours for the "Scanning & repairing drive" process to complete. There are tested and proven cases that indicate being patient & waiting is a workable solution.

Fix 3. Stop Windows from Scanning and Repairing the Drive

As you may know, you can disable the automatic disk checking process in the Automatic Repair. During Windows startup, you will have the chance to lớn bypass "Scanning and repairing drive" by pressing any key. Here are the detailed steps.

Step 1. Since you are now being stuck at "Scanning và repairing drive", you need lớn press the power nguồn button to lớn shut down the computer.

Step 2. Start the computer và you will see the "Preparing Automatic Repair" screen và then "Diagnosing your PC".

Step 3. Before the disk checking starts, you need to lớn press any key, e.g. The spacebar, continuously, và then you will get the chance khổng lồ disable the disk checking. (You can also press "Ctrl + C" khổng lồ have a try.)

*

Fix 4. Disable Automatic Repair

Automatic Repair doesn"t always work. It is known khổng lồ cause troubles like Windows stuck at "Preparing Automatic Repair", Automatic Repair loop, và the one in the discussion, "Scanning & repairing drive" stuck. Therefore, you can disable Automatic Repair to lớn avoid these problems. Lớn get it done, you will need lớn enter the Windows Recovery Environment or the Windows installation media. Given that most users don"t have the Windows installation media available, here I"d lượt thích to show you how to lớn get things done in WinRE.

Step 1. Hold down the nguồn button for 10s khổng lồ shut down the computer.

Step 2. Press the power nguồn button lớn start the computer. Once you see the first sign of Windows has started, e.g. The hình ảnh sản phẩm of the manufacturer, hold down the nguồn button for 10s again to lớn turn off the device.

Step 3. Press the power button khổng lồ start the computer. Once Windows restarts, hold down the power nguồn button for 10s to lớn turn off the computer.

Step 4. Press the power nguồn button khổng lồ start the computer & don"t interrupt it this time. Then you will see your computer in WinRE.

Step 5. On the "Choose an option" screen, choose "Troubleshoot" > "Advanced options" > "Command Prompt".

Step 6. Enter bcdedit and remember the values of "identifier" & "recoveryenabled" under Windows Boot Loader, Generally, it"s "current" và "Yes".

Step 7. To disable Automatic Repair, enter bcdedit /set current recoveryenabled no. ("current" indicates the current OS & change the value to lớn "no" will abort Automatic Repair.)

Step 8. Restart the computer.

*

Fix 5. Enter Safe Mode và Run CHKDSK

Since the cause of "Scanning và repairing drive" stuck is highly likely to be disk errors like bad sectors và file system errors, you can choose lớn enter Safe Mode & run CHKDSK to fix the errors. Safe Mode starts the computer with minimal required services & drivers & thus is a diagnostic mode in which you can perform fixes.

Step 1. Hold down the power button for 10s lớn shut down the computer.

Step 2. Press the power nguồn button to start the computer. Once you see the first sign of Windows has started, e.g. The hình ảnh sản phẩm of the manufacturer, hold down the power button for 10s again khổng lồ turn off the device.

Step 3. Press the nguồn button lớn start the computer. Once Windows restarts, hold down the power button for 10s lớn turn off the computer.

Step 4. Press the power nguồn button lớn start the computer và don"t interrupt it this time. Then you will see your computer in WinRE.

Step 5. On the "Choose an option" screen, choose "Troubleshoot" > "Advanced options" > "Startup Settings" > "Restart".

Step 6. After the restart, you will see a menu of options as shown in the image below. Select "5" or press "F5" to enable Safe Mode with Networking.

Step 7. Open "This PC", right-click the drive that Windows is stuck at scanning và repairing, then choose "Properties".

Xem thêm: " Count Me In Là Gì - Count Me In, I'Ll Be There

Step 8. Go lớn the "Tools" tab & choose "Check". (This works the same as running CHKDSK in Command Prompt.)

*

Fix 6. Recover Data

In most cases, one of the solutions above will fix the "Scanning và repairing drive C, D..." stuck issue in Windows 10. But there may be exceptions that the C drive (the system drive) is severely damaged và you can"t boot into Windows even after you try all the fixes. In such a situation, you will need bootable data recovery software lượt thích nasaconstellation.com Data Recovery Wizard with Bootable Media to rescue all the files from the non-working PC & then reinstall Windows.